3Com 7750 Series Chapter 1 UDP-Helper Configuration Commands

3Com Switch 7750 Series
Command Reference Guide – UDP Helper Chapter 1 UDP-Helper Configuration Commands
1-1
Chapter 1 UDP-Helper Configuration Commands
1.1 UDP-Helper Configuration Commands
1.1.1 debugging udp-helper
Syntax
debugging udp-helper { event | packet [ receive | send ] }
undo debugging udp-helper { event | packet [ receive | send ] }
View
User view
Parameter
event: Enables/disables debugging for UDP-Helper events.
event: Enables/disables debugging for sending/receiving UDP-Helper packets.
receive: Enables/disables debugging for receiving UDP-Helper packets.
send: Enables/disables debugging for sending UDP-Helper packets.
Description
Use the debugging udp-helper command to enable debugging for UDP-Helper.
Use the undo debugging udp-helper command to disable debugging for UDP-Helper.
By default, debugging for UDP-Helper is disabled.
Example
# Enable debugging for sending/receiving UDP-Helper packets.
<3Com> debugging udp-helper packet
1.1.2 display udp-helper server
Syntax
display udp-helper server [ interface vlan-interface vlan-id ]
View
Any view
Parameter
vlan-id: ID of a VLAN.