3Com Switch 7750 Series
Command Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands
3-21
Example
# Set the aging period of the SAP service entries to five times the update interval.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] ipx sap multiplier 5
3.1.22 ipx sap timer update Syntax
ipx sap timer update seconds
undo ipx sap timer update
View
System view
Parameter
seconds: SAP update interval. It is in the range of 10 to 60,000.
Description
Use the ipx sap timer update command to configure a SAP update interval.
Use the undo ipx sap timer update command to restore the default value.
By default, the SAP update interval is 60 seconds.
Note that this command is invalid if the triggered updates feature is applied on the
VLAN interface.
Related command: ipx sap multiplier and ipx update-change-only.
Example
# Set the SAP update interval to 300 seconds.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] ipx sap timer update 300
3.1.23 ipx service Syntax
ipx service service-type name network.node socket hop hops [ preference
preference ]
undo ipx service { service-type [ name [ network.node ] ] [ preference preference ] |
all }