3Com Switch 7750 Series
Command Reference Guide – QoS Chapter 1 QoS Commands
1-33
Related command: display qos-interface traffic-red.
Note:
z Only type-A LPUs support this command.
z Only the permit rule can be referenced in this command and applied to hardware.
Example
# Perform the RED operation on the packets matching the permit rule in ACL 2000.
RED parameters can be set as follows: the qstart argument is 64 KB, the qstop
argument is 128 KB, and the probability argument is 20%.
<3Com> system-view
[3Com] interface Ethernet1/0/1
[3Com-Ethernet1/0/1] qos
[3Com-qoss-Ethernet1/0/1] traffic-red outbound ip-group 2000 64 128 20
1.1.25 traffic-redirect Syntax
traffic-redirect inbound acl-rule [ system-index ] { cpu | interface interface-type
interface-number }
undo traffic-redirect inbound acl-rule
View
QoS view
Parameter
inbound: Performs traffic redirect on the packets received by the port.
outbound: Performs traffic redirect on the packets sent by the port.
acl-rule: Applied ACL rules which can be the combination of various ACL rules. For the
ways of combining ACLs and the description on related parameters, refer to Table 1-4
and Table 1-6.
system-index: Specifies an interior index value which is used when an ACL rule is
applied to the port. The index value ranges from 0 to 4294,967,295. This keyword is