3Com Switch 7750 Series
Command Reference Guide – ARP Chapter 1 ARP Configuration Commands
1-9
text: String used to filter ARP mapping entries.
Description
Use the display arp | command to display the ARP mapping entries related to string in
a specified way.
Related command: arp static, reset arp.
Example
# Display all the ARP mapping entries that contain the string “77”.
<3Com>dis arp | include 77
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Port Name / AL ID Aging Type
192.168.0.77 0000-e8f5-6a4a 1 Ethernet1/0/2 12 D
--- 1 entry found ---
# Display all the ARP entries that do not contain the string “68”.
<3Com>dis arp | exclude 68
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Port Name / AL ID Aging Type
10.2.72.162 000a-000a-0aaa N/A N/A N/A S
--- 1 entry found ---
Refer to Table 1-1 for the description on the above output information.
1.1.11 display arp entry-limit Syntax
display arp entry-limit [ interface interface-type interface-number ]
View
Any view
Parameter
Interface-type: Port type.
Interface-number: Port number.
Description
Use this command to display the limit of the number of ARP entries.