3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-11
Related command: domain.
Example
# Allow users in ISP domain aabbcc.net to enable the idle-cut attribute in user template
(that is, allow the user to use the idle-cut function), with the maximum idle time of 50
minutes and the minimum data flow of 500 bytes.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] domain aabbcc.net
New Domain added.
[3Com-isp-aabbcc.net] idle-cut enable 50 500
1.1.9 level Syntax
level level
undo level
View
Local user view
Parameter
level: Priority level of the user. It is an integer ranging from 0 to 3 and defaulting to 0.
Description
Use the level command to set the priority level of the user.
Use the undo level command to restore the default priority level of the user.
Note:
The commands that a user can access after login is determined by the priority level of
the user and the level set on the user interface. If the two levels are different:
z The command level that a user passing AAA/RADIUS authentication can access is
determined by the priority level of the user. For example, if the priority level of a user
is 3 and the command level set on the VTY 0 user interface is 1, the user can access
the commands under level 3 after logging in to the system from VTY 0.
z The command level that a user passing RSA authentication can access is
determined by the level set on the user interface.