3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-61
Note that:
z You are not allowed to assign the same IP address to both primary and secondary
accounting servers; otherwise, unsuccessful operation is prompted.
z If you repeatedly use this command, the latest configuration overwrites the
previous one.
z You can remove an accounting server only when it is not being used by any active
TCP connections, and the removal impacts only packets forwarded afterwards.
Example
# Configure a primary accounting server.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] primary accounting 10.163.155.12 49
1.3.9 primary authentication Syntax
primary authentication ip-address [ port ]
undo primary authentication
View
HWTACACS scheme view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal format.
port: Port number of the server, which is in the range 1 to 65535 and defaults to 49.
Description
Use the primary authentication command to configure a TACACS authentication
server.
Use the undo primary authentication command to delete the configured
authentication server.
By default, the IP address of TACACS authentication server is 0.0.0.0.
Note that:
z You are not allowed to assign the same IP address to both primary and secondary
authentication servers; otherwise, unsuccessful operation is prompted.
z If you repeatedly use this command, the latest configuration overwrites the
previous one.