3Com 7750 Series 3.1.47 silent-interface , 3.1.48 snmp-agent trap enable ospf

3Com Switch 7750 Series

Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands

3-52

3.1.47 silent-interface

Syntax

silent-interface Vlan-interface Vlan-interface-number

undo silent-interface Vlan-interface Vlan-interface-number

View

OSPF view

Parameter

Vlan-interface-number: Interface number.

Description

Use the silent-interface command to disable an interface from transmitting OSPF

packet.

Use the undo silent-interface command to restore the default setting.

By default, the interface is enabled to transmit OSPF packet.

To prevent the router on some network from receiving the OSPF routing information,

you can use this command to disable this interface from transmitting OSPF packet.

On the switch, this command can be used to enable/disable OSPF packet

transmission through the specified VLAN interface.

Example

# Disable interface Vlan-interface 20 from transmitting OSPF packet.

<3Com> system-view

System View: return to User View with Ctrl+Z.

[3Com] ospf 1

[3Com-ospf-1] silent-interface Vlan-interface 20

3.1.48 snmp-agent trap enable ospf

Syntax

snmp-agent trap enable ospf [ process-id ] [ ifstatechange | iftxretransmit |

originatelsa | maxagelsa | lsdboverflow | lsdbapproachoverflow ]*

undo snmp-agent trap enable ospf [ process-id ] [ ifstatechange | iftxretransmit |

| maxagelsa | lsdboverflow | lsdbapproachoverflow ]*