3Com 7750 Series Chapter 1 Information Center Commands

3Com Swich 7750 Series
Command Reference Guide – Information Center Chapter 1 Information Center Commands
1-1
Chapter 1 Information Center Commands
1.1 Information Center Commands
1.1.1 display channel
Syntax
display channel [ channel-number | channel-name ]
View
Any view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Channel name. By default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the display channel command to display the settings of an information channel.
If no argument is provided, the settings of all channels are displayed.
Example
# Show details about the information channel 0.
<3Com> display channel 0
channel number:0, channel name:console
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE
DEBUG_LEVEL
ffff0000 default Y warning Y debugging Y debugging
1.1.2 display info-center
Syntax
display info-center
View
Any view