3Com 7750 Series Chapter 1 MAC Address Table Configuration Commands

3Com Switch 7750 Series
Command Reference Guide – MAC Address Table Chapter 1 MAC Address Table Configuration Commands
1-1
Chapter 1 MAC Address Table Configuration
Commands
 Note:
This chapter describes the management of static and dynamic MAC address entries.
For information on the management of multicast MAC address entries, refer to the
section related to multicast protocol in the 3Com Switch 7750 Series Command
Reference Guide.
1.1 MAC Address Table Configuration Commands
1.1.1 bridgemactocpu
Syntax
bridgemactocpu { enable | disable }
View
System view
Parameter
enable: Enables the packets to be passed to the CPU for processing.
disable: Disables the packets from being passed to the CPU for processing.
Description
Use the bridgemactocpu command to set whether the packets with destination MAC
address as the bridge MAC address of the switch will be passed to the CPU for
processing.
By default, the packets with destination MAC address as the bridge MAC address of the
switch are not passed to the CPU for processing.
Example
# Enable the packets with destination MAC address as the bridge MAC address of the
switch to be passed to the CPU for processing.
<3Com> system-view