3Com 7750 Series 1.3 Internal Channel Monitor Commands

3Com Switch 7750 Series

Command Reference Guide – Hardware Commands Chapter 1 Hardware Configuration Comm

ands

1-3

Parameter

auto: Sets the inter-card links are established in the auto negotiation mode.

fix: Sets the inter-card links are established the fix mode.

Description

Use the set inlink command to set the mode in which inter-card links are established.

By default, inter-card links are established in the auto negotiation mode.

Example

# Configure the inter-card links to be established in the fix mode.

<3Com> system-view

System View: return to User View with Ctrl+Z.

[3Com] set inlink fix

1.3 Internal Channel Monitor Commands

Syntax

monitor inner-channel [ reboot-lpu | reboot-switch ]

undo monitor inner-channel [ reboot-lpu | reboot-switch ]

View

System view

Parameter

reboot-lpu: Restarts a service card.

reboot-switch: Restarts a switch.

Description

Use the monitor inner-channel command to enable the function of monitoring internal

channels.

Use the undo monitor inner-channel command to disable the function of monitoring

internal channels.

By default, the function of monitoring internal channels is enabled.

An internal channel refers to the interface channel between the SRPU and the service

cards. The SRPU sends handshake packets to each service card every second. After

receiving the handshake packets, the service cards reports the result to the SRPU. In

this case, the SRPU knows that the service cards are operating normally. Through this