3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 5 BGP Configuration Commands
5-37
5.1.40 peer enable Syntax
peer { group-name | ip-address } enable
undo peer { group-name | ip-address } enable
View
BGP view
Parameter
group-name: Name of the peer group, containing 1 to 47 characters.
ip-address: IP address of the peer.
Description
Use the peer enable command to enable the specified peer/peer group.
Use the undo peer enable command to disable the specified peer/peer group.
By default, BGP peer/peer group is enabled.
If the specified peer/peer group is disabled, the router will not exchange routing
information with the specified peer/peer group.
Example
# Disable the specified peer 18.10.0.9. After the configuration, the local router does
not exchange BGP routing information with the peer 18.10.0.9..
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer 18.10.0.9 group group1
[3Com-bgp] undo peer 18.10.0.9 enable
5.1.41 peer filter-policy export Syntax
peer group-name filter-policy acl-number export
undo peer group-name filter-policy acl-number export
View
BGP view
Parameter
group-name: Name of the peer group, containing 1 to 47 characters.