3Com Switch 7750 Series
Command Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands
3-3
3.1.2 display ipx routing-table Syntax
display ipx routing-table [ network [ verbose ] | protocol { default | direct | rip |
static } [ inactive | verbose ] | statistics | verbose ]
View
Any view
Parameter
network: Displays IPX routing information by specifying a destination network number,
which comprises eight hexadecimal numbers and is in the range of 1 to 0xFFFFFFFE.
protocol: Displays the IPX routing information of the specified route type.
default: Displays the information of all the default routes.
direct: Displays information of all the direct routes.
rip: Displays all the IPX RIP routing information.
static: Displays all the IPX static routing information.
inactive: Displays the information of the inactive routes.
verbose: Displays the detailed IPX routing information, including the active and
inactive routes.
statistics: Displays the IPX routing statistics.
Description
Use the display ipx routing-table command to view the IPX routing information.
If no parameters are specified, the information of all the active IPX routes will be
displayed.
Example
# View the information of the active IPX routes.
<3Com> display ipx routing-table
Routing tables:
Summary count: 2
Dest_Ntwk_ID Proto Pre Ticks Hops Nexthop Interface
0x1 Direct 0 1 0 0.0000-0000-0000 Vlan-interface1
0x2 Static 60 1 1 1.000e-0001-0000 Vlan-interface1