3Com 7750 Series Chapter 1 802.1x Configuration Commands

3Com Switch 7750 Series

Command Reference Guide – 802.1x Chapter 1 802.1x Configuration Commands

1-1

Chapter 1 802.1x Configuration Commands

Syntax

display dot1x [ sessions | statistics ] [ interface interface-list ]

View

Any view

Parameter

sessions: Displays the formation about 802.1x sessions.

statistics: Displays the statistics information about 802.1x.

interface: Display the 802.1x-related information about a specified port.

interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this

argument in the form of interface-list = { interface-name [ to interface- name] & < 1-10 >.

The interface-name argument is the port index of an Ethernet port and can be specified

in this form: interface-name = { interface-type interface-num }, where interface-type

specifies the type of an Ethernet port and interface-num identifies the number of the

port. “&<1-10>” means that up to 10 port indexes/port index lists can be provided.

Description

Use the display dot1x command to display 802.1x-related information, such as

configuration information, operation information (session information), and statistics.

By default, this command displays all 802.1x-related information of each port.

When the interface-list argument is not provided, this command displays

802.1x-related information on all ports. The output information can be used to verify

802.1 x-related configurations and to troubleshoot.

Related commands: reset dot1x statistics, dot1x, dot1x retry, dot1x max-user,

dot1x port-control, dot1x port-method, and dot1x timer.

Example

# Display 802.1x-related configuration information.

<3Com> display dot1x

Equipment 802.1X protocol is enabled

CHAP authentication is enabled