3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-29
Description
Use the display ospf retrans-queue command to display the information about the
OSPF retransmission queue.
Example
# Display the information about the OSPF retransmission queue.
<3Com> display ospf retrans-queue
OSPF Process 200 with Router ID 103.160.1.1
Retransmit List
The Router's Neighbors is
RouterID: 162.162.162.162 Address: 103.169.2.2
Interface: 103.169.2.5 Area: 0.0.0.1
Retrans list:
Type: ASE LSID:129.11.77.0 AdvRouter:103.160.1.1
Type: ASE LSID:129.11.108.0 AdvRouter:103.160.1.1
Table 3-13 Description on the fields of the display ospf retrans-queue command
Field Description
RouterID Router ID of neighbor router
Address Address of the interface, through which neighbor routers
communicate with the router
Interface Address of the interface on the network segment
Area Area number of OSPF
Type Type of the LSA
LSID Link State ID of the LSA
AdvRouter Router ID of the router that advertises the LSA
Syntax
display ospf [ process-id ] routing
View
Any view
Parameter
process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a
process ID, this command applies to all current OSPF processes.