3Com 7750 Series Chapter 3 IPX Configuration Commands

3Com Switch 7750 Series

Command Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands

3-1

Chapter 3 IPX Configuration Commands

Syntax

display ipx interface [Vlan-interface vlan-id ]

View

Any view

Parameter

vlan-id: Specifies a VLAN interface by specifying its VLAN ID.

Description

Use the display ipx interface command to view the IPX information of the specified

VLAN interface.

If no vlan-id is specified, the IPX information of all the IPX-enabled VLAN interfaces

will be displayed.

Example

# View the IPX information of VLAN interface 1.

<3Com> display ipx interface Vlan-interface 1

Vlan-interface1 is down

IPX address is 1.0020-9c68-448e [down]

SAP is enabled

Split horizon is enabled

Update change only is disabled

Forwarding of IPX type 20 propagation packet is disabled

Delay of this IPX interface, in ticks is 1

SAP GNS response is enabled

RIP packet maximum size is 432 bytes

SAP packet maximum size is 480 bytes

IPX encapsulation is Netware 802.3

0 received, 0 sent

0 bytes received, 0 bytes sent

0 RIP received, 0 RIP sent, 0 RIP discarded

0 RIP specific requests received, 0 RIP specific responses sent