3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging Chapter 1 Basic System Configuration &
Debugging Commands
1-9
Example
# Display the status and configuration information about user terminal interfaces.
<3Com> display users
UI Delay Type Ipaddress Username
0 AUX 0 00:00:17
8 VTY 0 01:37:55 TEL 192.168.0.200
+ 9 VTY 1 00:00:00 TEL 192.168.0.3
12 VTY 4 00:00:00 TEL 192.168.0.115
Table 1-2 Description on the output user terminal interface information
Item Description
UI User interface
Delay Delay time when no interaction occurs
between user and device
Type User login type
Ipaddress IP address used when login using telnet
program
Username User name
Syntax
display version
View
Any view
Parameter
None
Description
Use the display version command to display the information (such as the version
information) about the switch system.
Specifically, you can use this command to check the software version and issue time,
the basic hardware configuration, and some other information about the switch.