3Com Switch 7750 Series
Command Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands
3-18
Parameter
None
Description
Use the ipx sap gns-disable-reply command to disable IPX GNS reply on the current
VLAN interface.
Use the undo ipx sap gns-disable-reply command to enable IPX GNS reply on the
current VLAN interface.
By default, GNS reply is enabled on the current VLAN interface.
Example
# Disable GNS reply on VLAN interface 2.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 2
[3Com-Vlan-interface2] ipx sap gns-disable-reply
3.1.18 ipx sap gns-load-balance Syntax
ipx sap gns-load-balance
undo ipx sap gns-load-balance
View
System view
Parameter
None
Description
Use the ipx sap gns-load-balance command to configure the switch to respond to
GNS requests through Round-Robin polling.
Use the undo ipx sap gns-load-balance command to configure the switch to respond
to GNS requests with information of the nearest server.
By default, the switch responds to SAP GNS requests with the information of a server
that is picked out in turn from all the known servers. This prevents a server from
getting overloaded.
Related command: ipx sap gns-disable-reply