3Com 7750 Series 1.1.5 ntp-service authentication enable , 1.1.6 ntp-service authentication-keyid

3Com Switch 7750 Series
Command Reference Guide – NTP Chapter 1 NTP Configuration Commands
1-5
1.1.5 ntp-service authentication enable
Syntax
ntp-service authentication enable
undo ntp-service authentication enable
View
System view
Parameter
None
Description
Use the ntp-service authentication enable command to enable the NTP-service
authentication function.
Use the undo ntp-service authentication enable command to disable this function.
By default, the authentication is disabled.
Example
# Enable NTP authentication function.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] ntp-service authentication enable
1.1.6 ntp-service authentication-keyid
Syntax
ntp-service authentication-keyid number authentication-mode md5 value
undo ntp-service authentication-keyid number
View
System view
Parameter
number: Specifies the key number from 1 to 4,294,967,295.
value: Specifies the value of the key with 1 to 32 ASCII characters.
Description
Use the ntp-service authentication-keyid command to set an NTP authentication
key.