3Com 7750 Series 1.1.9 ntp-service disable , 1.1.10 ntp-service in-interface disable

3Com Switch 7750 Series
Command Reference Guide – NTP Chapter 1 NTP Configuration Commands
1-8
1.1.9 ntp-service disable
Syntax
ntp-service disable
undo ntp-service disable
View
System view
Parameter
None
Description
Use the ntp-service disable command to disable the NTP service function.
Use undo ntp-service disable command to enable this function.
By default, the NTP service is enabled.
Example
# Disable NTP service on the device.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] ntp-service disable
1.1.10 ntp-service in-interface disable
Syntax
ntp-service in-interface disable
undo ntp-service in-interface disable
View
VLAN interface view
Parameter
None
Description
Use the ntp-service in-interface disable command to disable an interface from
receiving NTP messages.
Use undo ntp-service in-interface disable command to enable an interface to
receive NTP messages.