3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 5 BGP Configuration Commands
5-36
Related command: display current-configuration, display bgp peer, and display
bgp routing-table group.
Example
# Configure the description information of an existing peer group named group1 as
ISP1.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer group1 description ISP1
5.1.39 peer ebgp-max-hop Syntax
peer group-name ebgp-max-hop [ hop-count ]
undo peer group-name ebgp-max-hop
View
BGP view
Parameter
group-name: Name of the peer group, containing 1 to 47 characters.
hop-count: Maximum hop value, in the range of 1 to 255. By default, the value is 64.
Description
Use the peer ebgp-max-hop command to establish EBGP connection with the peer
on indirectly connected network.
Use the undo peer ebgp-max-hop command to cancel the existing configuration.
By default, it is not allowed to establish any EBGP connection with a peer on an
indirectly connected network.
By setting hop-count, you can also configure the maximum hop value of an EBGP
connection.
Example
# Allow to establishing EBGP connection with the peer group named test indirectly
connected.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] bgp 100
[3Com-bgp] peer test ebgp-max-hop