3Com 7750 Series Chapter 1 DLDP Configuration Commands

3Com Switch 7750 Series

Command Reference Guide – DLDP Chapter 1 DLDP Configuration Commands

1-1

Chapter 1 DLDP Configuration Commands

Syntax

display dldp [ interface-type interface-number ]

View

Any view

Parameter

interface-type: Port type.

interface-number: Port number.

Description

Use the display dldp command to display the configuration information, status

information and neighbor tables of the DLDP-enabled port.

z The configuration information of the DLDP-enabled port includes the interval,

authentication mode, password, DLDP operating mode, and DLDP handling mode

after a unidirectional link is detected.

z The status information includes the neighbor status, local port status and link

status.

z The neighbor table includes the MAC address, port ID, neighbor status and aging

time items.

Example

# Display information about all the DHLP-enabled ports.

<3Com> display dldp

dldp interval 10

dldp work-mode enhance

dldp authentication-mode none

dldp unidirectional-shutdown manual

The port number with DLDP is 2.

interface GigabitEthernet2/0/1

dldp port state : inactive