3Com 7750 Series Chapter 2 isolate-user-VLAN Configuration Commands

3Com Switch 7750 Series
Command Reference Guide – Extended VLAN Applications Chapter 2 isolate-user-VLAN Configuration Commands
2-1
Chapter 2 isolate-user-VLAN Configuration
Commands
 Note:
You need to configure the hybrid attribute for a port in the process of configuring an
isolate-user-VLAN. For hybrid port-related commands, refer to the Port Basic
Configuration part of the 3Com Switch 7750 Command Reference Guide.
2.1 isolate-user-VLAN Configuration Commands
2.1.1 display isolate-user-vlan
Syntax
display isolate-user-vlan [ vlan-id ]
View
Any view
Parameter
vlan-id: VLAN ID of the configured isolate-user-VLANs, ranging from 1 to 4,094.
Description
Use the display isolate-user-vlan command to display the mapping between the
isolate-user-VLAN and the secondary VLAN, and the current status and port
information of the isolate-user-VLAN and the secondary VLAN.
Related command: isolate-user-vlan enable and isolate-user-vlan.
Example
# Display the mapping between the isolate-user-VLAN and the secondary VLAN.
<3Com> display isolate-user-vlan
Isolate-user-VLAN Vlan ID : 3
Secondary Vlan ID : 4-5
Vlan ID: 3
Vlan Type: static