3Com 7750 Series 1.1.14 interface

3Com Switch 7750 Series
Command Reference Guide — Basic Port Commands Chapter 1 Port Basic Configuration Commands
1-15
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] hardspeedup enable
1.1.14 interface
Syntax
interface interface-type interface-number
View
System view
Parameter
interface-type: Port type, which can be Aux, Ethernet, GigabitEthernet, LoopBack,
M-Ethernet, NULL, Tunnel or Vlan-interface.
interface-number: Port number, in the format of LPU slot number/subcard slot
number/port number.
Table 1-5 Range of LPU slot number/subcard slot number
Description
Device
Range of LPU
number Subcard slot number Range of port number
S6502 0 to 1 0
S6503 0 to 3 0
S6506 0 to 6 0
S6506R 0 to 7 0
Depending on the
number of ports on the
LPU you select
Description
Use the interface command to enter Ethernet port view. To configure parameters for a
port, you must enter the port view first.
Example
# Enter GigabitEthernet1/0/1 port view.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface GigabitEthernet1/0/1
[3Com-GigabitEthernet1/0/1]