3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 6 IP Routing Policy Configuration Commands
6-5
Description
Use the apply ip next-hop command to set the IP address of next hop.
Use the undo apply ip next-hop command to cancel the setting argument.
By default, no next hop is defined.
An apply statement of Route-policy sets the next hop of the filtered packets.
Related command: if-match interface, if-match acl, if-match ip-prefix, if-match ip
next-hop, if-match cost, if-match tag, route-policy, apply local-preference,
apply cost, apply origin and apply tag.
Example
# Define an apply statement to set the next hop in the routing information to 193.1.1.8.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com]route-policy 10 permit node 10
[3Com-route-policy] apply ip next-hop 193.1.1.8
6.1.6 apply isis Syntax
apply isis [ level-1 | level-2 | level-1-2 ]
undo apply isis
View
Route-policy view
Parameter
level-1: Imports routes to level-1 area.
level-2: Imports routes to level-2 area.
level-1-2: Imports routes to both level-1 area and level-2 area.
Description
Use the apply isis command to define an apply clause to import routing information
into the IS-IS area(s) at specified level(s).
Use the command to cancel the clause setting.
By default, no apply clause is defined.
Related command: if-match interface, if-match acl, if-match ip-prefix, if-match ip
next-hop, if-match cost, if-match tag, route-policy, apply cost, apply origin and
apply tag