3Com 7750 Series Chapter 1 VRRP Configuration Commands

3Com Switch 7750 Series
Command Reference Guide – VRRP & HA Chapter 1 VRRP Configuration Commands
1-1
Chapter 1 VRRP Configuration Commands
1.1 VRRP Configuration Commands
1.1.1 debugging vrrp
Syntax
debugging vrrp { state | packet }
undo debugging vrrp { state | packet }
View
User view
Parameter
state: Debugs VRRP state.
packet: Debugs VRRP packets.
Description
Use the debugging vrrp command to enable VRRP debugging.
Use the undo debugging vrrp command to disable VRRP debugging.
By default, VRRP debugging is disabled.
Example
# Enable VRRP state debugging.
<3Com> debugging vrrp state
1.1.2 display vrrp
Syntax
display vrrp [ interface Vlan-interface valn-id | statistics [ Vlan-interface vlan-id ] ]
[ virtual-router-id ]
View
Any view
Parameter
interface: Displays VRRP information about the specified VLAN interface.
vlan-id: VLAN interface ID.