3Com Switch 7750 Series
Command Reference Guide – NTP Chapter 1 NTP Configuration Commands
1-2
1.1.2 display ntp-service status Syntax
display ntp-service status
View
Any view
Parameter
None
Description
Use the display ntp-service status command to display the NTP service status.
Example
<3Com> display ntp-service status
Service status：enabled
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^18
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
The following table describes the displayed fields:
Table 1-1 NTP service status information
Field Meaning
Service status NTP service status: enabled or disabled
Clock status:
unsynchronized
Local clock status: is not synchronized to any remote NTP
server
Clock stratum Indicates the NTP stratum of the local clock
Reference clock
ID
Indicates the address of a remote server or the clock source
ID when the local system is synchronized with a remote NTP
server or a clock source