3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 6 IP Routing Policy Configuration Commands
6-9
Field Description
ip-prefix / mask Address and network segment length of
ip-prefix
GE Greater-equal value of ip-prefix network
segment length
LE Less-equal value of ip-prefix network
segment length
Syntax
display route-policy [ route-policy-name ]
View
Any view
Parameter
route-policy-name: Name of the route-policy to be displayed, containing 1 to 19
characters.
Description
Use the display route-policy command to display the configured Route-policy.
If you do not specify a route policy name, this command displays all route-policies
configured.
Related command: route-policy.
Example
# Display the information about Route-policy named policy1.
<3Com> display route-policy policy1
Route-policy : policy1
Permit 10 : if-match (prefixlist) p1
apply cost 100
matched : 0 denied : 0
Table 6-2 Description on the fields of the display route-policy command
Field Description
Route-policy Name of ip-prefix
Permit 10 Information about the route-policy with the mode configured as
permit and the node as 10: