3Com 7750 Series 1.3 Protocol-Based VLAN Configuration Commands

3Com Switch 7750 Series

Command Reference Guide – VLAN Commands Chapter 1 VLAN Configuration Commands

1-12

Caution:

The port command is only applicable to access ports. To add trunk ports and hybrid

ports to a VLAN, you can use the port trunk permit vlan and port hybrid vlan

commands in Ethernet port view. For related command information, refer to the Port

Basic Configuration Command section of the 3Com Switch 7750 Command Reference

Guide.

Related command: display vlan.

Example

# Add Ethernet1/0/1 through Ethernet1/0/3 to VLAN 2.

<3Com> system-view

System View: return to User View with Ctrl+Z.

[3Com] vlan 2

[3Com-vlan2] port Ethernet1/0/1 to Ethernet1/0/3

1.3 Protocol-Based VLAN Configuration Commands

Syntax

display protocol-vlan interface { { interface-type interface-number [ to interface-type

interface-number ] } | all }

View

Any view

Parameter

{ interface-type interface-number [ to interface-type interface-number ] }: Specifies the

port number of the protocol to be displayed. If you do not use the to keyword, only one

port is specified. If you use the to keyword, multiple contiguous ports are specified. The

interface-type argument refers to the port type and the interface-number argument

refers to the port number.

all: Displays the protocol-related information about all ports.

Description

Use the display protocol-vlan interface command to display the protocol-based

VLAN information, including VLAN ID, protocol index and protocol type.

Related command: display interface.