3Com Swich 7750 Series
Command Reference Guide – Information Center Chapter 1 Information Center Commands
1-20
another. Use default configuration record if a module does not have any specific
configuration record in the channel.
Example
# Enable the log information of VLAN module in SNMP channel and allow the output of
the information with a level higher than emergencies.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] info-center source vlan channel snmp log level emergencies
1.1.15 info-center timestamp Syntax
info-center timestamp { log | trap | debugging } { boot | date | none }
undo info-center timestamp { log | trap | debugging }
View
System view
Parameter
log: Specifies log information.
trap: Specifies trap information.
debugging: Specifies debugging information.
boot: Specifies to adopt the time elapsed since system boot, which is in the format of
“xxxxxx.yyyyyy”, where xxxxxx is the high 32 bits and yyyyyy the low 32 bits of the
elapsed milliseconds.
date: Specifies to adopt the current system date and time, which is in format
“yyyy/mm/dd-hh:mm:ss:ms” for Chinese environment and “Mmm dd hh:mm:ss:ms
yyyy” for English environment.
none: Specifies not to include time stamp in specified output information.
Description
Use the info-center timestamp command to configure the timestamp output format in
debugging/trap information.
Use the undo info-center timestamp command to restore the default settings.
By default, the date time stamp is adopted for all types of information.
Example
# Configure the debugging information timestamp format as boot.
<3Com> system-view