3Com 7750 Series 1.2 RADIUS Configuration Commands

3Com Switch 7750 Series

Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS

Configuration Commands

1-23

 Caution:

z You are recommended to configure the VLAN assignment mode for the switch the

same as that of the assignment attribute value of the RADIUS authentication server.

Configure the correct assignment mode with the vlan-assignment-mode

command so that the switch correctly identifies the dynamic VLAN assigned by the

server. If the assignment modes are different, the expected configuration may not

take effect.

z In string mode, the VLAN to be assigned must exist on the switch and must have

been configured with a VLAN name. This is not required in integer mode.

z In string mode, if the VLAN ID assigned by the RADIUS server is a character string

containing only digits (for example, 1024), the switch first regards it as an integer

VLAN ID: the switch transforms the string to an integer value and judges if the value

is in the valid VLAN ID range; if it is, the switch adds the authenticated port to the

VLAN with the value as the VLAN ID (VLAN 1024, for example).

Related command: name, dot1x guest-vlan

Example

# Set the VLAN assignment mode to string.

<3Com>system-view

System View: return to User View with Ctrl+Z.

[3Com] domain aabbcc.net

New Domain added.

[3Com-isp-aabbcc.net] vlan-assignment-mode string

1.2 RADIUS Configuration Commands

Syntax

accounting-on enable [ send times | interval interval ]

undo accounting-on { enable | send | interval }

View

RADIUS scheme view

Parameter

times: Maximum number of attempts to send Accounting-On packets, ranging from 1 to

256 and defaulting to 40.