3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON Chapter 1 SNMP Configuration Commands
1-15
Example
# Set contact information for system maintenance as Dial System Operator # 1234.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] snmp-agent sys-info contact Dial System Operator # 1234
1.1.16 snmp-agent target-host Syntax
snmp-agent target-host trap address udp-domain { ip-address } [ udp-port
port-number ] params securityname security-string [ v1 | v2c | v3 [authentication |
privacy ] ]
undo snmp-agent target-host ip-address securityname security-string
View
System view
Parameter
trap: Specifies the host to be a Trap host.
address: Specifies the address of the destination host for transmitting SNMP
messages.
udp-domain: Specifies transport domain over UDP for the target host.
ip-address: The IPv4 address of the host receiving Trap packets.
port-number: Number of the port receiving Trap packets, ranging from 0 to 65,535
characters.
params: Specifies SNMP target host information to be used in the generation of SNMP
messages.
security-string: The community name of SNMP V1 and SNMP V2C, or SNMP V3 user
name, ranging from 1 to 32 characters.
v1: Represents SNMPv1.
v2c: Represents SNMPv2C.
v3: RepresentsSNMPv3.
authentication: Configures to authenticate the packet without encryption.
privacy: Configures to authenticate and encrypt the packet.
Description
Use snmp-agent target-host command to configure destination of SNMP Trap
packets.