3Com 7750 Series Chapter 1 Remote Ping Commands

3Com Switch 7750 Series
Command Reference Guide – Remote Ping Chapter 1 Remote Ping Commands
1-1
Chapter 1 Remote Ping Commands
1.1 Remote Ping Commands
1.1.1 count
Syntax
count times
undo count
View
Remote Ping test group view
Parameter
times: Number of the test packets to be transmitted. It is in the range 1 to 15 and
defaults to 1.
Description
Use the count command to configure the number of packets to be sent for each test.
Use the undo count command to restore the default.
A test timer is started when the system sends the first test packet. In the event that the
times argument is set greater than one, the system continues to send the second one
upon receipt of the reply to the first one. If receiving no reply upon expiry of the timer,
the system sends the second and all the remaining packets likewise.
Related command: frequency.
Example
# Set that the “administrator-icmp” test group sends ten packets for each test.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] remote ping administrator icmp
[3Com-remote ping-administrator-icmp] count 10
1.1.2 destination-ip
Syntax
destination-ip ip-address
undo destination-ip