3Com Switch 7750 Series
Command Reference Guide – VRRP & HA Chapter 1 VRRP Configuration Commands
1-3
Field Description
Version Errors Number of version errors
VRID Errors Number of backup group ID errors
Advertisement Interval Errors Number of advertisement time interval errors
IP TTL Errors Number of TTL errors
Auth Failures Number of authentication errors
Invalid Auth Type Number of invalid authentication types
Auth Type Mismatch Number of mismatched authentication types
Packet Length Errors Number of VRRP packet length errors
Address List Errors Number of the virtual IP address list errors
Become Master Number of the occasions where the switch
operates as the master
Priority Zero Pkts Rcvd Number of the received advertisement packets
with the priority of 0
Advertise Rcvd Number of the received advertisement packets
Priority Zero Pkts Sent Number of the sent advertisement packets with
the priority of 0
Invalid Type Pkts Rcvd Number of packet type errors
1.1.3 reset vrrp statistics
Syntax
reset vrrp statistics [ vlan-interface vlan-id ] [ virtual-router-id ]
View
User view
Parameter
vlan-id: VLAN interface ID.
virtual-router-id: VRRP virtual router ID ranging from 1 to 255.
Description
Use the reset vrrp command to clear the statistics information about VRRP.
When you execute this command,
z If the interface index and backup group ID are not specified, the statistics
information about all the backup groups on the switch is cleared.