3Com 7750 Series 4.1.12 igmp report-aggregation

3Com Switch 7750 Series
Command Reference Guide – Multicast Chapter 4 IGMP Configuration Commands
4-12
Example
# Configure VLAN-interface 2 as the IGMP proxy interface of VLAN-interface 1 on the
Layer 3 switch.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] multicast routing-enable
[3Com] interface vlan-interface 1
[3Com-Vlan-interface1] igmp enable
[3Com- Vlan-interface1] igmp proxy vlan-interface 2
4.1.12 igmp report-aggregation
Syntax
igmp report-aggregation
View
System view
Parameter
None
Description
Use the igmp report-aggregation command to enable suppression on Layer 3
multicast IGMP report packets. On an IP-multicast-routing-enabled switch, the VLAN
interface receives only the first IGMP report packet from a multicast group in a query
interval.
Use the undo igmp-snooping report-aggregation command to disable suppression
on Layer 3 multicast IGMP report packets.
By default, suppression on IGMP report packets is disabled.
 Note:
z You must enable IP multicast routing globally before configuring suppression on
IGMP report packets.
z If IP multicast routing is disabled globally, suppression on IGMP report packets is
disabled simultaneously.
Example
# Enable suppression on Layer 3 multicast IGMP report packets on the switch.