3Com Switch 7750 Series
Command Reference Guide – Configuration File Management Chapter 1 Configuration File Management
Commands
1-3
Description
Use the display current-configuration command to display the currently effective
configuration parameters of the switch.
By default, if some running configuration parameters are the same with the default
operational parameters, they will not be displayed.
If a user needs to authenticate whether the configurations are correct after finishing a
set of configuration, the display current-configuration command can be used to
display the running parameters. Although the user has configured some parameters,
but the related functions are not effective, they are not displayed.
When there is much configuration information, you can use the regular expression to
filter the output information. For specific rules about the regular expression, refer to
the corresponding operation manual.
Related command: save, reset saved-configuration and display
saved-configuration.
Example
# View the running configuration parameters of the switch.
<3Com> display current-configuration
#
sysname 3Com
#
radius scheme system
server-type nec
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domain
domain system
radius-scheme system
access-limit disable
state active
idle-cut disable
domain default enable system
#
local-server nas-ip 127.0.0.1 key hello
#
router id 2.2.2.2
#
stp timer hello 500
#