3Com Switch 7750 Series
Command Reference Guide — Basic Port Commands Chapter 1 Port Basic Configuration Commands
1-5
This command is similar to the display interface command, but the information it
displays is briefer.
Note:
Currently, for the port types other than Ethernet port, this command only displays the
link state, and shows "--" in all other configuration information fields.
Related command: display interface.
Example
# Display the brief configuration information about the GigabitEthernet1/0/1 port.
<3Com> display brief interface GigabitEthernet1/0/1
Interface:
Eth - Ethernet GE - GigabitEthernet TENGE - tenGigabitEthernet
Loop - LoopBack Vlan - Vlan-interface Cas - Cascade
Speed/Duplex:
A - auto-negotiation
Interface Link Speed Duplex Type PVID Description
-------------------------------------------------------------------------
GE3/0/1 UP A1000M Afull hybrid 1 abc123
Table 1-1 Description on the fields of the display brief interface command
Field Description
Interface Port type
Link Link state: UP or DOWN
Speed Link rate
Duplex Duplex mode
Type Link type: access, hybrid or trunk
PVID Default VLAN ID
Description Port description string (only the first 33
characters are displayed)
Syntax
display interface [ interface-type | interface-type interface-number ]