3Com Switch 7750 Series
Command Reference Guide – 802.1x Chapter 1 802.1x Configuration Commands
1-21
View
User view
Parameter
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of interface-list = { interface-name [ to interface- name] & < 1-10 >.
The interface-name argument is the port index of an Ethernet port and can be specified
in this form: interface-name = { interface-type interface-num }, where interface-type
specifies the type of a port and interface-num identifies the port number. "&<1-10>"
means that up to 10 port indexes/port index lists can be provided.
Description
Use the reset dot1x statistics command to clear 802.1x-related statistics.
Use this command to reset 802.1x-related statistics.
In this command:
If the interface-list argument is not specified, this command clears statistics globally
and the 802.1X statistics on all ports. If the interface-list argument is specified, this
command clears statistics on the ports specified by the argument.
Related command: display dot1x.
Example
# Clear 802.1x-related statistics on Ethernet 3/0/1 port.
<3Com> reset dot1x statistics interface Ethernet 3/0/1