3Com Switch 7750 Series
Command Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands
3-24
Use the undo ipx tick command to restore the default value.
By default, the forwarding delay on the VLAN interface is one tick.
Example
# Configure VLAN interface 2 to experience a delay of five ticks before forwarding IPX
packets.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 2
[3Com-Vlan-interface2] ipx tick 5
3.1.26 ipx update-change-only Syntax
ipx update-change-only
undo ipx update-change-only
View
VLAN interface view
Parameter
None
Description
Use the ipx update-change-only command to enable triggered update on the current
VLAN interface.
Use the undo ipx update-change-only command to disable triggered update on the
current VLAN interface.
By default, triggered update of IPX is disabled.
Example
# Enable triggered update of IPX on VLAN interface 2.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com]interface Vlan-interface 2
[3Com-Vlan-interface2] ipx update-change-only
3.1.27 reset ipx routing-table statistics protocol Syntax
reset ipx routing-table statistics protocol { all | default | direct | rip | static }