3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-21
Table 3-6 Description on the fields of the display ospf interface command
Field Description
Cost Cost of the interface
State State of the interface state machine
Type Network type of OSPF
Priority Priority of DR for interface election
Designated
Router DR on the network in which the
interface resides
Backup
Designated
Router
BDR on the network in which the
interface resides
OSPF timers, defined as follows:
Hell
o Interval of hello
packet
Dea
d Interval of dead
neighbors
Poll Interval of poll
Timers
Retr
ans
mit
Interval of
retransmitting LSA
Transmit Delay Delay time of transmitting LSA
Syntax
display ospf [ process-id [ area-id ] ] lsdb [ brief | [ asbr | ase | network | nssa |
router | summary ] [ ip-address | verbose ] [ originate-router ip-address |
self-originate ] ]
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command
applies to all current OSPF processes.
area-id: OSPF area ID, which can be a decimal integer (ranging from 0 to
4294967295) or in the form of an IP address.
brief: Displays brief statistics information about the link state database (LSDB).