3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-20
Description
Use the display ospf interface command to display the OSPF interface information. If the verbose keyword is provided, the detailed information about the OSPF interface is displayed. Example
# Display the OSPF interface information of Vlan-interface1. <3Com> display ospf interface vlan-interface 1
OSPF Process 1 with Router ID 1.1.1.1
Interfaces
Interface: 10.110.10.2 (Vlan-interface1)
Cost: 1 State: BackupDR Type: Broadcast
Priority: 1
Designated Router: 10.110.10.1
Backup Designated Router: 10.110.10.2
Timers: Hello 10, Dead 40, Poll 10, Retransmit 5, Transmit Delay 1
# Display the detailed information about the OSPF interface. <3Com>display ospf interface verbose
OSPF Process 1 with Router ID 192.168.0.68
Interfaces
Area: 0.0.0.0
Vlan-interface1 is up, line protocol is up
Internet Address is 192.168.0.68/24
Network Type: Bcast, Cost: 10
State: BackupDR, Priority: 1
Designated Router: 192.168.0.35
Backup Designated Router: 192.168.0.68
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
Area: 0.0.0.2
Vlan-interface200 is up, line protocol is up
Internet Address is 200.1.1.68/24
Network Type: Bcast, Cost: 10
State: DR, Priority: 1
Designated Router: 200.1.1.68
Backup Designated Router: 200.1.1.35
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1