3Com 7750 Series Chapter 2 Selective Q-in-Q Configuration Commands

3Com Switch 7750 Series

Command Reference Guide — Q-in-Q Commands Chapter 2 Selective Q-in-Q Configuration Commands

2-1

Chapter 2 Selective Q-in-Q Configuration Commands

 Note:

You can implement traffic-based selective Q-in-Q on an Switch 7750 Series switch by

using ACLs and QoS techniques. Refer to the QoS part of this manual for related

commands and operations.

Syntax

raw-vlan-id inbound vlan-id-list

undo raw-vlan-id inbound { all | vlan-id-list }

View

Q-in-Q view

Parameter

vlan-id-list: List of VLAN Ids. You need to provide this argument in the form of

vlan-id-list = { vlan-id [ to { vlan-id } ] } & <1-10>, where & <1-10> means that you can

provide up to ten VLAN Ids/VLAN ID lists

all: Specifies the packets of all the VLANs.

As for the vlan-id-list argument, the value of 1 to 4094 is not suipported due to ACL

limitations.

Description

Use the raw-vlan-id inbound command to specify a group of VLANs, single-tagged

inbound packets of which are to be tagged with specified outer VLAN tags.

Use the undo raw-vlan-id inbound command to remove the configuration.

Note that the raw-vlan-id inbound command needs to be coupled by the vlan-vpn vid

command.