EliteMail VMS/EliteMail Limited

Issue 3

 

 

 

 

￿For Voice Mail messages sent to multiple mailboxes

For Voice Mail messages sent to mailboxes that do not correspond to the actual station number.

If DND, Call Forward - All Call, or station Outgoing Lockout is set during Live Monitoring Mode, Live Monitoring is canceled. If required, a station user must set up Live Monitoring after setting Call Forward - All Call.

SECTION 9

ENABLE/DISABLE

LIVE MONITORINGLive Monitoring is enabled or disabled using Softkeys. When enabled, softkeys can set Live Monitoring to automatic or manual mode.

If your telephone does not have softkeys, the system manager can set up

Automatic Live Monitoring.

In automatic mode, a Live Monitoring session starts as an outside caller begins leaving you a message. Pick up the handset or press Speaker anytime to connect to the caller.

In manual mode, you choose when to start. As an external caller begins leaving a message, the softkey LCD shows START and CANCEL. Press START to begin Live Monitoring or CANCEL to end. After you press CANCEL, the message continues to be recorded and is sent to your voice mailbox. Pick up the handset or press Speaker anytime to connect to the caller. The message recorded before you connect is also saved in your mailbox.

During Live Monitoring, the Feature Access or One-Touch key that is assigned for Live Monitoring flashes green and the large LED flashes red.

Reference

8 - 7

Page 138
Image 138
NEC 750370 manual Section ENABLE/DISABLE