NEC 750370 manual Use Special Characters for Pagers, Group Owner

Issue 3EliteMail VMS/EliteMail Limited

Use Special Characters for Pagers

In most cases, you only need to call a pager to activate it. To set the voice mail system to call these pagers, enter the pager telephone number in the field for the message delivery telephone number followed by a few pauses and a disconnect (e.g., 555-1234,,,Q)Q means disconnect.

Other pagers require that you dial the number, wait for answer, and then dial the number the subscriber should call back. For details on how best to deliver messages to these types of pagers, contact Technical Support.

Also Refer To:

Section 1 Message Types on page 9-1

Section 10 Message Playback on page 9-31

￿Chapter 20 Subscribers

EliteMail VMS/EliteMail Limited Voice Mail User Guide #750178-0

SECTION 7

MESSAGE GROUPS Message groups let you send the same message to a group, such as a department. You send a message to a message group just like you send a message to a subscriber, identifying the group by name or group number. The System Manager can create and maintain message groups at the system console. Subscribers can also create and maintain their own message groups from any touchtone telephone, by accessing setup options. Guests cannot create or send messages to message groups.

This section explains how to create and maintain message groups.

The Group Owner

Every message group has an owner. The owner is either a subscriber that creates the group by telephone or is assigned as the group owner by the System Manager at the console. A System Manager can be a group owner.

Only the owner of a group can change the group by telephone, including:

Add or delete group members

￿Change the group name or number Delete the group itself.

However, the System Manager can change any group at the console.

9 - 18 Messages