EliteMail VMS/EliteMail Limited Issue 3
Programming 1 - 3
3. Dial .
4. Enter the class of service number.
5. , , to advance to page 4.
6. Press LK5 to enable live record for tha t cla s s of se rv ic e.
7. to write data.
8. Repeat Steps 4~7 for each class of serv ic e .
9. .
Program Memory Block 3-45, Live Record ing Trunk Selection. This
program selects live record feature tru nk-by-trunk as follows:
1. Press LK3.
2. .
3. Dial .
4. Press followed by the CO/PBX line number.
5. Press LK2 to allow live record on this CO/ PB X line.
6. to write data.
7. Repeat Steps 2~6 for each CO/PBX line that requires live record.
8. .
Live Monitoring Parameters
Program Memory Block 1-8-08 , Class of Service (Station) Feature
Selection 2. This program selects the live monit oring fe ature pe r class of
service as follows:
1. Press LK1.
2. Press LK8.
3. Dial .
4. Enter the class of service number.
5. , , to advance to page 5.
6. Press LK6 to enable live monitoring for t ha t class of service.
7. LK6 LED remains on while live monitori ng is enabled.
This feature is available on the FMS( )-U10 ETU as an upgrade
option only.