UsingRemoteMaintenance

￿￿￿￿￿￿￿￿

SECTION 1

GENERAL

INFORMATIONThis chapter explains how to use Remote Maintenance to make a connection with the host computer to control or change a customer voice mail system from the remote computer.

SECTION 2

START REMOTE

VERSION

No special action is required to load the host version of Remote Maintenance software on the host computer.

Remote Maintenance must be running on both the host and the remote computers to make a connection between them. Remote Maintenance is always running on the host computer. However, you must explicitly start the Remote Maintenance software on the remote computer.

To establish a connection from the remote computer, start Remote Maintenance:

Enter RR, and press ￿￿￿￿￿￿￿￿to load the software. This command loads the remote version of the software, making it resident in computer memory. A Banner Screen is displayed briefly. Then, the DOS prompt is returned.

You may now continue to use DOS to run other programs on the remote computer, but the Remote Maintenance Main Menu is now accessible. The remote software remains resident and accessible until you restart the remote computer.

Console Maintenance

3 - 1

Page 40
Image 40
NEC 750370 manual UsingRemoteMaintenance, Section Start Remote Version