NEC 750370 manual Use Message Waiting Ring, Use Pager or Beeper

Issue 3 EliteMail VMS/EliteMail Limited

A/D (Answer/Dial out)

This port answers incoming calls. When the port is not answering an incoming call, it dials out to deliver messages and to light message waiting lamps.

A/L (Answer/Light Lamps)

This port answers incoming calls. When the port is not answering an incoming call, it dials out only to light subscriber message waiting lamps.

For details on setting port status options, refer to Chapter 13 Port

Applications.

Use Message Waiting Ring

You can set up the voice mail system to notify callers with a message waiting ring when a new message is waiting. The system dials an extension and then hangs up, with enough of a pause that the extension issues a single, short ring.

To do this, add a comma and Q to the subscriber extension number in a message delivery telephone number field on the subscriber Personal Directory page (e.g., X,Q).

Use Pager or Beeper

The system can also dial out to a pager or beeper to notify a subscriber when a new message is waiting. This is handled through the system message delivery feature and is discussed in Section 5 Message Delivery on page 9-9.

Also Refer To:

Section 1 Message Types on page 9-1

Section 9 Message Notification on page 9-29

Section 10 Message Playback on page 9-31

Chapter 13 Port Applications

Chapter 20 Subscribers

Chapter 21 Switch Setup

9 - 58 Messages