NEC 750370 manual Fax ID, Voice name, Transfer?

EliteMail VMS/EliteMail Limited Issue 3

￿Fax ID

The System ID to reach the fax machine. The ID must be unique and cannot conflict with any other Personal IDs, Extension # IDs, or System IDs. Callers press this ID to send manual faxes. You should mention this ID in the opening greeting, so callers know the number to dial to reach the fax machine.

To prevent callers from pressing the System ID directly, you can use a hidden System ID (by adding $ to the beginning of the System ID). If the fax System ID is hidden, or if the Fax ID field is blank, outside callers cannot send manual faxes. The system delivers automatic faxes only.

Voice name

The fax box recorded name is the Public Fax Box. You may record this name again using a local connection if you want. For details, refer to Chapter 15 Recording Voice Fields.

Transfer?

To set up the voice mail system to handle incoming faxes, set the Transfer? field to Yes and enter the telephone extension number that the fax machine is connected to. The voice mail system transfers all incoming fax calls to this extension.

Just below the Transfer? field, specify the call transfer you want: Release, Await-Ans, or Wait-Ring. Except for a Release call transfer, specify the number of rings you want the voice mail system to wait. For more details on how call transfer works, refer to Chapter 2 Section 2 Call Transfer on page 2-11and Section 3 Screen Calls

￿on page 2-16.

Holding?

This field applies only to manual faxes, and requires Await Answer or Wait for Ringback transfer. Set this field to Yes if a person sending a manual fax should be allowed to hold by pressing 1 if the fax machine extension is busy. Set this field to Vox if the person should be allowed to hold by saying Yes instead of pressing touchtones. A fax machine sending an automatic fax cannot hold. To turn off call holding, set this field to No.

Reference 4 - 3