EliteMail VMS/EliteMail Limited

Issue 3

 

 

 

 

To upgrade VMS(4)-U10 ETU to VMS(8)-U10 ETU

1.Verify that the HDD LED on the VMS(4)-U10 ETU is off.

2.Verify that the BCLR LED is green.

3.Turn off the MB (Make Busy) switch and verify that the MB LED is on.

4.Wear a grounding strap when removing the VMS(4)-U10 ETU from the Electra Elite KSU.

5.Locate connectors J10 and J8 on the left side of the ETU, and press down on the DSP-F-21 Unit until a secure connection is made.

6.Return the ETU to the KSU.

7.Turn the MB Switch on.

8.Connect the PC to the VMS( )-U10 ETU.

9.Shut down the Voice Mail Application.

10.From the C:\VMAIL prompt, enter ACTIVATE.

11.Enter the Activation Code. (Call NEC customer service for this code).

12.￿Restart the Voice Mail system.

To upgrade from VMS(2)-U10 to VMS(8)-U10, perform upgrade from VMS(2)-U10 to VMS(4)-U10, and then perform upgrade from VMS(4)-U10 to VMS(8)-U10.

SECTION 4

 

 

UPGRADE

 

 

ELITEMAIL LIMITED

 

 

TO 4-PORTS

The EliteMail Limited hardware is shown in Figure 2-2 FMS( )-U10 ETU.

 

To upgrade from 2-port to 4-port configuration:

 

1.

Connect the PC to the FMS( )-U10 ETU.

 

2.

Shut down the Voice Mail Application.

 

3.

From the C:VMAIL prompt, enter ACTIVATE.

 

4.

Enter the Activation Code (Call NEC Customer Service for the code).

 

5.

Restart the VoiceMail system.

Hardware Specifications

2 - 3

Page 9
Image 9
NEC 750370 manual To upgrade VMS4-U10 ETU to VMS8-U10 ETU, Section Upgrade Elite Mail Limited To 4-PORTS