Commands Listed in Alphabetical Order
Arguments CH1–CH4 specifies the analog channel to use as the I2C SCLK source.
D0–D15 specifies the digital channel to use as the I2C SCLK source.
BUS:B<x>:I2C{:DATA|:SDATA}:SOUrce
Sets or returns the I2C SDATA source for bus <x>, where x is the bus number.
Conditions This command requires a DPO4EMBD application module.
Group Bus
Syntax BUS:B<x>:I2C{:DATA|:SDATA}:SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:I2C{:DATA|:SDATA}:SOUrce?
Arguments CH1–CH4 specifies the analog channel to use as the I2C SDATAsource.
D0–D15 specifies the digital channel to use as the I2C SCLK source.
BUS:B<x>:LABel
Sets or returns the waveform label for bus < x>, where x is the bus number
1 through 4.
Group Bus
Syntax BUS:B<x>:LABel <Qstring>
BUS:B<x>:LABel?
Arguments <Qstring> is an alphanumeric string of text, enclosed in quotes, that contains the
text label information for bus <x>. The text string is limited to 30 characters.
BUS:B<x>:LIN:BITRate
Sets or returns the bit rate for LIN.
Group Bus
MSO4000 and DPO4000 Series Programmer Manual 2-97