Commands Listed in Alphabetical Order
NOTE. The command returns NA, if the currentharmonic standard is set to a new
standard other than the returned query.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:HAR<1-400>:FREQuency?
Examples POWER:HARMONICS:RESULTS:HAR400:FREQUENCY? might return
:POWER:HARMONICS:RESULTS:HAR400:FREQUENCY 24000 indicating that
the harmonic frequency is set to 24000.
POWer:HARMonics:RESults:HAR<1-400>:IECMAX? (Query Only)
The IEC Standard species harmonics measurements to be computed in time
windows, with each time window being nominally 200 ms. This returns the
maximum of the RMS magnitude of the harmonic, computed across successive
200 ms time windows within an observation period entered by the user.
NOTE. The command returns NA, if the currentharmonic standard is set to a new
standard other than the returned query.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:HARMonics:RESults:HAR<1-400>:IECMAX?
Examples POWER:HARMONICS:RESULTS:HAR400:IECMAX? might return
:POWER:HARMONICS:RESULTS:HAR400:IECMAX 1.0 indicating that the
maximum value is 1.0 A for the 400th harmonic.
POWer:HARMonics:RESults:HAR<1-400>:LIMit? (Query Only)
The IEC and MIL standards specify a limit for each harmonic magnitude. Returns
the limit in absolute units, or as a percentage of the fundamental as specied by
MSO4000 and DPO4000 Series Programmer Manual 2-259